Emblem

Choose Right Adhesive

When choosing a tile adhesive, it is important to read the product label carefully to make sure that it is suitable for the specific project. It is also important to follow the manufacturer's instructions for mixing and applying the adhesive.

Divine Silver is A Polymer Modified Cement Based Adhesive For All Ceramic & Porcelain Tiles On Wall and Floor. And Vitrified Tiles Up To 600x600mm On Floor For Internal Use.

Packing : 20Kg Bag in Grey.

Divine Silver is A Polymer Modified Cement Based Adhesive For All Ceramic Tiles On Wall, Porcelain and Vitrified Tiles Up To 600x1200mm On Floor For Internal Use.

Packing : 20Kg Bag in Grey.

Divine Diamond Is High Polymer Modified Cement Based Adhesive For Vitrified Tiles On Wall & Floor For Interior & Exterior Use And Also Use For Window Seals, Tile On Tile.

Packing : 20Kg Bag in Grey.

Divine Platinum Is High Polymer Modified Cement Based Adhesive For Ceramic & Vitrified Large Format Tiles, For Interior & Exteriors Use For Window Seals, Tile On Tile.

Packing : 20Kg Bag in Grey and White.

Divine Platinum Plus Is High Polymer Modified Strong cementitious Universal Adhesive For Vitrified Tiles ( S To Xxl Sizes) On Wall, Floor & Ceiling. As Well As On Granites & Natural Stones. For Interior & Exteriors Use, For Window Seals, Tile On Tile.

Packing : 20Kg Bag in Grey and White.

Usage

Adhesive Best For All Kind Heavy Duty Large Tiles (1200x2400mm, 1200x1800mm, 1600x3200mm, 800x2400 15mm, 800x3000 15mm) Etc. Italian Marble, Granites, Natural Stones, Glass Mosaic On Wall & Floor In Interior & Exterior Uses. Tile On Tile.

Coverage

Approx 25-30 Sq.ft. Per 20kg Bag @6mm Thickness When Using Thin Trowel.

Technical Parameter

1.50 N/nm2(Req.)
2.00 N/nm2(Result)
Type-4, C2 TES1 Adhesive

How to use

Before laying or fixing the tiles the surface must thoroughly cleaned from dust, dirt, oil, grease, wax, polish etc.

Pour water into an empty bucket. Add 3 parts adhesive powder and 1 part of water (pour 6-7 ltr. water for a 20kg bag).Addition of water shall be adjusted to attain desired consistency.

Use the flat side first and then the serrated trowel to spread the adhesive to the required thickness.The tile should be installed within 10 to 15 minutes strictly immediate after spreading the adhesive paste.

Place the tiles on the surface to be tiled and tap the tiles lightly so that the back side of the tiles can be completely fixed.

Allow the tiling set for 24 hours and fill the joints with tile grout the next day.